Shop

TASKI VECTRA

SKU: D17553

High performance fast curing floor finish for use on all internal resilient floors such as vinyl and porous composite tiles.

Contact Us to buy this product.

Diversey Vectra is a high performance fast curing floor finish for use on all internal resilient floors such as vinyl, rubber and porous composite tiles.
Vectra delivers diamond like brilliance and clarity across a wide variety of surfaces. Vectra can be top coated over Plaza stone floor sealer for even more flexible floorcare solutions.

Features and Benefits:

  • Low maintenance floor sealer/finish with excellent durability.
  • Vectra is a floor sealer/finish with high gloss for low maintenance areas.
  • Vectra responds well to spray buff programs, and exhibits excellent durability and off the mop gloss.
  • For best results use with machines 350-1500 rpm.
  • Coverage 1 litre approx 50-60 square metres.
  • Vectra is extremely hard, with excellent adhesion and good resistance to scuffing and black heel marks.
  • Vectra is very fast curing reducing the time between recoats.
  • Vectra has excellent gloss and clarity ensuring long term floor appearance.

 

DIRECTION TO USE:

Application

  1. Strip old coatings using a Diversey stripper according to label directions. Allow floor to dry.
  2. Apply one coat of Vectra using a clean mop or applicator.
  3. Allow coats to dry for 20-30 minutes depending on drying conditions.
  4. Apply 3-4 further coats of Vectra using a clean mop required.

Maintenance

  1. Dust, mop or sweep to remove and dust or dirt.
  2. Clean floor with a Diversey cleaner diluted in cold water according to label directions.
  3. Maintain the gloss of Vectra using periodic recoating or spray buffing using an approved pad.
  4. Wash out all equipment before storage.

Before recoating

  1. Dust mop or sweep to remove and dust or dirt.
  2. Deep scrub floor using an approved pad and Diversey cleaner diluted in cold water according to label directions.
  3. When dry, apply 2-3 coats of Vectra using a clean mop as required.
  4. Allow coats to dry for 20-30 minutes depending on drying conditions.

Additional information

Brand

Product Weight

5L